Welding · NDT · inspection · quality
The platform for
welding, NDT, inspection and quality.
Procedures, welder qualifications, NDT reports and the handover dossier — one system for the whole job, instead of spreadsheets and shared drives.
Four suites, one platform
Start with the suite that fits you.
There are four suites: three by trade — someone makes the weld, someone tests it, someone certifies — and Quality, for whoever owns the quality system across them. Each bundles the modules that role runs on, all sharing one record. Take the one that describes you.
Worgify Fabrication
Weld procedures, welders, joints and NDT status in one register — the handover dossier builds as you go.
- Weld execution & tracking
- Procedures & welder qualification
- Inspection and test plans
- Nonconformance and corrective action
- Material & heat traceability
- The handover dossier
Worgify NDT
Run NDT on other people's work — field or ISO 17025 lab — with every report verifiable from a QR.
- Non-destructive testing
- Nonconformance and corrective action
Worgify Certification
Certify welders and qualify procedures; the engine computes the qualified ranges straight from the code.
- Welder and procedure certification
- Procedures & welder qualification
Worgify Quality
The quality system on one record — inspection plans, nonconformities, calibrated instruments and the dossier, across any trade.
- Inspection and test plans
- Nonconformance and corrective action
- Instrument calibration
- Document control
- Competence & training
- The handover dossier
Modules that run across any suite
A module is one capability. Some come inside the suites above; these you add to whichever suite you start from — same record, not a separate login.
One system, one record
From the arc to the sealed record.
One weld, written once — it flows from the procedure that qualifies it, through the examination, into the sealed handover dossier. No re-typing, no reconciliation.
Why it's different
It all rolls up into one handover dossier.
Every procedure, qualification, NDT report and certificate collects into the MRB/MDR as you work — so on consignment day it's already complete. Export it sealed and hand it over, instead of spending the last three weeks rebuilding it by hand.
See how the dossier builds →Who it's for
Built for anyone who answers to a welding code.
EN 1090, PED, ASME IX, EN 15085, ISO 3834 — switch the regime on per job and it runs across every suite. Every record you produce is publicly verifiable from a QR.
Work in a specific sector? Find your industry →
Free tool
Know the day a standard you rely on changes.
Standards get revised, superseded and withdrawn, and nobody tells you. The monitor watches the UNI catalogue and does — search it freely, get an email when one you follow moves. No account to look.
Open the standards monitor →See it on your own job.
Bring a real weld map, a procedure, a report you had to produce — we work through it. Thirty minutes, and we'll tell you plainly if the fit is wrong.